• Food Safe & Odor-Free: We formulated Tumblers Coating Epoxy with 100% food-safe, FDA-compliant ingredients and made sure that it is odor-free with no VOCs.
• Gorgeous Glass-Like Finish: Sell your tumblers for top dollar thanks to the hard, scratch-resistant, clear glass-like finish. Mixes so smoothly that bubbles disappear!
  Tensile Strength, psi before cracking – 10,500
• Easy 1:1 Mixing Ratio: No complicated math needed here! Simply mix equal parts resin and hardener to get the volume your project needs and create less waste!
• Fast Cure & Predictable Working Time: We know how important it is to know how much time you have to work with resin materials! Tumblers Coating Epoxy has a working time of 40-50 minutes and cures FAST so your projects will look fantastic.
• UV Stable, Won’t Yellow: There’s nothing worse than seeing a perfect project ruined when the resin yellows. Our epoxy is UV stable so it stays crystal clear!

A kit of Tumblers Coating Epoxy Resin contains equal amounts of epoxy and curing agent (measured by weight). Full instructions are also included within the package and online.

Additional Information: Tumblers Coating Epoxy Resin is a clear polymer used for coating wood, veneer, metal, stone, painted surfaces, tabletops, bar tops, many other surfaces to give a rich super gloss look and protect from scratching and air humidity. The typical pot life of Tumblers Coating Epoxy Resin is approximately 40-50 minutes based on mass and temperature. The full cure is 24 hours at normal conditions.

Mixing: Mix this resin 1:1 by volume. Smoothly mix for at least 3-5 minutes until the chemical is clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items.

Storage: This chemical needs to be stored in a dry, safe, temperature-controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use.

Safety: When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.

Our General Use CRYSTAL CLEAR EPOXY is a clear polymer used for coating wood, veneer, metal, stone, painted surfaces, tabletops, bar tops, many other surfaces to give rich super gloss look and protect from scratching and air humidity.

Surfaces coated with this General Use Epoxy are durable, water-resistant and easy to care. The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass.

Our epoxy resin provides a fast cure and property development at ambient and low temperatures without accelerators and allows for a quick return to service.

The typical pot-life on this item is roughly 45-50 minutes based on mass and temperature.

Thin-film set time (3mil. film) is roughly 5 hours at 78F. Fast cure and green time while exhibiting low exothermic temperatures (120C.) makes this product ideal for all applications. The full cure is 24 hours at normal conditions.

Mixing, Storage, and Application for epoxy resin:

Mix this resin 1:1 by volume. If mixing by weight, mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of the mixing container. Improperly mixed epoxy can create a major headache. Remember that thermoset plastics are temperature sensitive. Cold weather slows the curing process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature. For best results, try pouring epoxy into the hardener. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes. Use a round motion until the chemical is clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items.

This chemical needs to be stored in a dry, safe, temperature-controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use.
When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.

Mix Ratio…………………………………1:1 by volume
Pot-Life …………………………………..45-50 minutes (100gram mass)
Hardness…………………………………D78
Mixed Viscosity……………………….1200cps.
Tensile Strength, psi before cracking …. 7,500
Compressive Strength, psi………15,400
Linear Shrinkage, in/in……………..0008
Chemical Resistance………………..excellent
Moisture Resistance…………………excellent
Dielectric Strength, (volt/mil)…….550
Dielectric Constant, 1mhz…………3.2

You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.

This product is a 3:1 mix. It is 100% polyamine based epoxy system that is designed for high gloss crystal clear casting applications. This epoxy system will cure rigid with a blush free, shiny high gloss finish.  This product was specifically developed for large castings – low viscosity (150cps.) bubble free – 0% shrinkage – minimal yellowing  – low exotherm. 

This resin can also be used for embedding as well as castings where typically micro-bubbles and heat are an issue.  Cured specimens will be free of bubbles and have the optically clear appearance.

This epoxy system will cure rigid with a blush free, shiny high gloss finish. This product was specifically developed for large castings – 3″ in depth. This has low viscosity (150cps.) and can do what other epoxies can’t.    

Approved applications:      

• Large castings (riverbed pours)
• Jewelry making
• Hobbyist and craft making
• Floral arrangements
• Fake water applications
• Waterproofing & sealing

Advantages:

• Bubble-free
• Slow cure  (24-48 hours @ room temp.)
• Very low yellowing
• Minimal exotherm
• Low viscosity at 150cps (close to water)
• Pot life of 240 minutes (150 grams)
• Acid, chemical, & moisture resistant
• Rigid, blush-free, high gloss finish
• Hardness shore – durometer scale d-88
• Heat resistant to 130c. 

• This is not a polyester 

• Tensile Strength – 8750

You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.